Fitting the Brake Trolley on the Cable

Fitting The Brake Trolley

The Brake Trolley is installed on the zip line and is used to transfer the energy of the rider to the zipSTOP Braking Unit.

Always use the correct Brake Trolley size for the zip line. Failure to use the correct size my prematurely wear the trolley or zip line.

To fit the Brake Trolley:

  • Check the correct size Brake Trolley for zip line is being used.
  • Some disassembly is required to fit the Brake Trolley to zip line.
  • The Brake Trolley is installed with the Bump Stop toward the direction of rider arrival.
  • Ensure the two lower pulley wheels are located below the line and the single upper wheel is above the line.

SP Facebook

Zip Line News